Fusion Splicer INNO VIEW 8 Pro ORIGINAL
Kategori: Fiber Optik,Fusion Splicer | Dilihat: 22 Kali
Harga: -
Tambah ke Wishlist
Kode Produk: Fusion Splicer INNO VIEW 8 Pro 5 - 05-12-2024
Detail Produk
Fusion Splicer INNO VIEW8 Pro
VIEW8 PRO is a premium core-alignment splicer with the world’s highest specification, offers maximum work efficiency through the quick mode of 6s splice time and 9s heating time.
INNO Instrument VIEW8 PRO Premium Core Alignment Fusion Splicer
VIEW8 PRO is a premium core-alignment splicer with the world’s highest specification, offers maximum work efficiency through the quick mode of 6s splice time and 9s heating time. In addition to the machine’s superior hardware and technical specifications, the fusion splicer has a built-in IoT module that connects to the INNO’s View Pro Could Management System for real-time operation and management online. This innovative cloud-based solution is designed to create the most advanced and yet most uncomplicated splicing and work experience ever.
Features
- Built-in IoT Module for Mobile Data Communication
- Web-based, Real-Time Operation System
- Precise Fiber Core Alignment Technology
- Active Asset & Work Management Platform
- 5” Color LCD Touch Screen
- Double Tapping (Zoom In & Out)
- User Friendly Interface with Built-in Videos
- Ultra-High Capacity Battery
- High Definition CMOS
- Advance Multi-Control Industrial CPU for motors
Fusion Splicer INNO VIEW 8 Pro[/caption]
Specification
General |
|
| Model | VIEW8 PRO |
| Alignment Method | Core Alignment |
| Number of Fibers | Single |
| Applicable Fibers | SM (G.652 & G.657) / MM (G.651) / DS (G.653) / NZDS (G.655) / CS (G.654) / EDF / BIF |
| Cladding Diameter | 80 – 150µm |
| Coating Diameter | 100 – 3000µm |
| Cleave Length | 5 – 16mm |
| Typical Splice Loss*¹ | SM: 0.01dB / MM: 0.01dB / DS: 0.03dB / NZDS: 0.03dB / G.657: 0.01dB |
| Return Loss | >>60dB |
| Estimated Splice Loss | Available |
| Splice Time*² | Quick mode: AVG. 6 sec. / SM Auto mode: AVG. 8 sec. |
| Splice Mode | Max 128 modes |
| Heating Sleeve | 20 – 60mm |
| Heating Time*³ | 9 sec (45mm, slim 60mm), 15 sec (60mm) |
| Heating Mode | Max. 32 modes |
| Tension Test | 1.96 – 2.25N |
| Dimension | 143 (W) x 158 (D) x 162 (H) mm (with rubber bumper) 130 (W) x 157 (D) x 150 (H) mm (without rubber bumper) |
| Weight | 2.78kg (with battery) / 2.12kg (without battery) |
| White LED | 2 White LEDs |
| Monitor | 5.0” Color LCD Display, Full Touch Screen |
| Fiber View | X, Y, XY, X/Y |
| Magnification | 320 – 520x |
| Results Storage | 10.000 Splice data / 10.000 Splice image |
| Power Supply | AC Input 100 – 240V, DC 9 – 14V |
| Terminal | USB Type C / Nano SIM |
| Battery Capacity*⁴ | LBT-30, Typical usage: 355 cycles / Power save usage: 450 cycles |
| Electrode Life*⁵ | 500 ARCs discharge |
| GPS | Available |
| *¹: Measured by cut-back method relevant to ITU-T and IEC standards. *²: Measured at room temperature. Splice time may vary depending on the environmental conditions, fiber type and fiber characteristics. *³: Measured at room temperature. Heating time changes depending on the environmental conditions, sleeve type and battery pack condition. *⁴: Test condition (1) Splice and heat time: 2 minutes cycle; (2) Using full charged battery; (3) At room temperature. Splice & Heat cycle can be varied depending on the battery status and operation and environment condition. *⁵: The electrode life changes depending on the environmental conditions, fiber type and splice modes. |
|
Environmental Condition |
|
| Operating Conditions | Altitude: 0 – 5000m Humidity: 0 – 95%, non-dew Temperature: -10 to 50°C Wind: up to 15m/sec |
| Storage Conditions | Humidity: 0 – 95%, non-dew Temperature: -40 to 80°C |
Environmental Test |
|
| Water Resistance | IPx2 |
| Shock Resistance | Drop from 76cm |
| Dust Resistance | IP5X |
Dimension and Weight |
Height: 6.38 inches (162 mm) Width: 5.63 inches (143 mm) Depth: 6.22 inches (158 mm) Weight: 4.67 pounds (2.12kg without battery) |
| Package List | Fusion Splicer (VIEW8 PRO) Cleaver (V10 PRO) Fiber Holder (FH-45) SOC Holder (FH-SOC-R) SOC Heater Cover (HTS-SOC-04) AC Adaptor (JS-180300) Cooling Tray (CG-22) Electrodes (E-70) Battery Pack (LBT-30) Power Cable (ACC-25) USB Cable Type-C USB to Type-A USB (Male & Female) Cable (USB-7P) Work Tray (IWS-06) Work Tray Bolt M6*8 (WTB-01) Carrying Case (ICC-55) Shoulder Strap (ST-01) Quick Reference |
Mohon Tanyakan Stok Terlebih Dahulu Sebelum Order.
Untuk Pemesanan dan Informasi Harga Terbaik, Hubungi :
Rifki Faisal Bahri
HP : 085353410506 / 089618877628 / 089531793777
Whatsapp : 085353410506
Email : rifkifaisal93@gmail.com / rifky.gps93@gmail.com
Office :
Cv.Mitra Laser
Jl.Inpres 18 Komplek Sabar Ganda No 11 Tangerang selatan 15154
Produk Terkait
